Compteur de vis automatique FA-590 acheter compteur à vis 1,0-5,0 mm compteur de chenilles

Name:Automatic screw counting machine
Input power supply:AC220V 50 / 60Hz 1A
Size:127mm*82mm*150mm
Screw length:Within 20 mm
Track width:1.0mm-5.0mm adjustable
Screw type:Screw with nut can be used
Screw capacity:[about 1500 screws for M1] [1000 for M2] [600 for M3] [300 for M4] [200 for M5]
Function adjustment method of counting machine
1.Count setting
Turn on the power supply, press the "set" key and hold for 3 seconds, the light will flash, then press the "up and down triangle" key to set the digital display, 0-9999 arbitrary setting.
2.Automatic / manual setting
Press and hold the "set" key for 3 seconds, the light will flash, and then press the "set" key to select the mode.
(1) .Automatic mode: when the number of screws reaches the set value, the alarm will be given. After the alarm, the count will be reset automatically and enter the next cycle;
(2) .Manual mode: when the number of screws reaches the set value, it is necessary to press the "down triangle" key to clear to enter the next cycle;
(3) .Normal mode: there is no alarm function for normal counting, so press the "down triangle" key to clear to enter the next cycle.